Description of ZPSS POSCO Cold Rolled 304 0.35 0.3mm Mill Edge Stainless Steel Coils
Product Spec
Type
Int'l Standard
Steel Designation
Main Chemical Compositions
Mechanical Properties
Cr
Ni
Mo
Proof Stress (N/mm2)
Tensile Strength (N/mm2)
Elong- ation
HRB
304
ASTM A240-96
UNS S30403
18.00 ~20.00
8.00~12.00
>=
170
>=
485
>=
40
>=
92
304
ASME SA240-95
UNS S30403
18.00 ~20.00
8.00~12.00
>=
170
>=
485
>=
40
>=
92
304
CNS G3163-93
304L
18.00 ~20.00
8.00~13.00
>=
175
>=
480
>=
40
>=
90
304
JIS G4303-91
SUS 304L
18.00 ~20.00
8.00~13.00
>=
175
>=
480
>=
40
>=
90
304
EN 10088:1995
1.4306
18.00 ~20.00
8.00~12.00
>=
200
500 ~ 650
>=
45
304
DIN 17440:1996
1.4306
18.00 ~20.00
8.00~12.00
>=
180
460 ~ 680
>=
40
Thickness
Width
Surface
2.5.0mm ~ 28.0mm
1220MM ~ Max. 2300mm
NO.1
Thickness
Width
Hardness
0.1mm ~ 0.4mm
Could be negotiable for small strips,max.300mm
1/4H ; 3/4H ; 1/2H ; FULL HARD
0.5mm ~ 3.0mm
1220mm ~ Max. 1540mm
Description
ZPSS POSCO Cold Rolled 304 0.35 0.3mm Mill Edge Stainless Steel Coils
Standard
ASTM  GB/T  JIS4  ASME BS  DIN  EN.
Material
310S, 310, 309, 309S, 316, 316L, 316Ti, 317, 317L, 321, 321H, 347, 347H, 304, 304L,
302, 301, 201, 202, 403, 405, 409, 409L, 410, 410S, 420, 430, 631, 904L, Duplex, etc
Brand  name
TISCO, BAO STEEL, ZPSS, LISCO, POSCO, NAS.
Technique
Hot  Rolled  And  Cold  Rolled.
Surface
2B, 2D, BA, NO. 1, NO. 4, NO. 8, 8K, mirror  , checkered  , embossed  , hair  line, sand  blast,Brush, etching, etc
Thickness
0.25~150mm
Width
600mm, 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length
2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Price  term
Ex-Work, FOB, CNF, CFR, CIF, etc
Surface Treatment and characteristic
Surface finish
Characteristics and application
NO.2B
The surface brightness and flatness of no2B is better than no2D. then through a special surface
treatment to improve its mechanical properties,No2B could nearly satisfy
comprehensive uses.
The surface is finished by heat treatment and pickling or processes corresponding thereto after hot rolling.
NO.1
NO.4
Polished with abrasive belt of grit #150-#180,have better brightness with discontinuous
coarse stria,but thinner than No3, are used as bathtub buildings inner and external
ornaments electrical appliances kitchen utensils and food processing equipment etc.
Polished with abrasive belt of grit #150-#320 on the NO.4 finish and has continuous streak
HL
mainly used as buildings ornaments elevators,door of building, frontal plate etc.
BA
Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good
reflexivity like mirror,kitchen apparatus,ornament etc.
8K
The product have excellent brightness and prefer reflexivity can to be the mirror.
No 1 Finish
Plate is hot rolled, annealed, pickled and passivated. This results in a dull, slightly rough surface; quite suitable for industrial applications which generally involve the range of plate thicknesses. Grinding marks may be visible in isolated areas.
Some of the thinner thicknesses within the plate range are Cold Rolled; but Sheet, Coil and Strip gauges are produced by Cold Rolling, ie rolled without and heating of the material. Cold Rolling hardens the material, and the thinner sizes may have to be subjected to an intermediate anneal and pickle, or bright annealed, during the reduction of thickness to final gauge.
The starting material for Cold Rolling always has a No. 1 finish. Cold Rolled material is supplied with the following standard mill finishes.
No. 3 Finish
This is a ground unidirectional uniform finish obtained with 80 - 100 grit abrasive.
It is a good intermediate or starting surface finish for use in such instances where the surface will require further polishing operations to a finer finish after subsequent fabrication or forming.
No. 4 Finish
This is a ground unidirectional finish obtained with 150 grit abrasive. It is not highly reflective, but is a good general purpose finish on components which will suffer from fairly rough handling in service (eg restaurant equipment).
No. 6 Finish
These finishes are produced using rotating cloth mops (Tampico fibre, muslin or linen) which are loaded with abrasive paste.
The finish depends on how fine and abrasive is used, the uniformity and finish of the original surface.
The finish has a non-directional texture of varying reflectiveness. Satin Blend is an example of such a finish.
No. 7 Finish
This is a buffed finish having a high degree of reflectiveness.
It is produced by progressively using finer and finer abrasives and finishing with Buffing compounds. Some fine scratches (grit lines) may remain from the original starting surface.
No. 8 Finish
This is produced in an equivalent manner to a No. 7 Finish, the final operations being done with extremely fine buffing compounds.
The final surface is blemish free with a high degree of image clarity, and is the true mirror finish.
Note
The finer polished finishes (No. 4, No. 6, No. 7 and No. 8) are generally only produced one side of the sheet, the reverse side being either a 2B or No. 3 Finish.
58500 sqm of main area in Headquarter, total investment USD 490
million.
2 sets twenty-roll reversible cold rolling line with max width
1450mm.
2 sets of traction type consecutive Bright Annealing Line.
1 set of tension leveling processing line with max width 1450mm.
2 sets of tempering line.
1 set of withdrawal and straightening unit.
Other related washing, clearing and testing facilities.
FAQ
Q:Are you Manufacturer or Trading company
A: We are both manufacturer and trade in
Qingdao
city,
Shan
dong Province, China.
Q: Which mill hot
rolled
coils are you using
A: We are using such as BAOSTEEL, TISCO, JISCO
,POSCO
and LIANZHONG (GUANGZHOU LISCO) etc.
Q:What's your main products
A: Our main products is including Stainless Steel coil/sheet grade in 201,304,316L,430,410,Stainless Steel circle grade in 201&304&410&430.
Q: Can you make DDQ ( Deep Drawing Quality)
A: Yes, we can. Our material can be used for stainless steel pots, stainless steel sinks, stainless steel bowls etc. U can tell us your usage, and we will adjust the mechanical propertise to meet your requirement.
Q: How to get a sample
A: FREE samples are available for your checking and testing.If you require for a small piece,we can afford courier cost,it depends.
Why Do You Choose Us
·
We have high reputation based on best quality products;
·
We can offer competitive price for your bu
si
ness;
·
Our after-sell service team will help you solving all the related problems ;
·
Shortest and stable delivery time;
·
We can provide stainless steel processing services.
Description of ZPSS POSCO Cold Rolled 304 0.35 0.3mm Mill Edge Stainless Steel Coils
Product Spec
Surface Treatment and characteristic
No 1 Finish
Plate is hot rolled, annealed, pickled and passivated. This results in a dull, slightly rough surface; quite suitable for industrial applications which generally involve the range of plate thicknesses. Grinding marks may be visible in isolated areas.
Some of the thinner thicknesses within the plate range are Cold Rolled; but Sheet, Coil and Strip gauges are produced by Cold Rolling, ie rolled without and heating of the material. Cold Rolling hardens the material, and the thinner sizes may have to be subjected to an intermediate anneal and pickle, or bright annealed, during the reduction of thickness to final gauge.
The starting material for Cold Rolling always has a No. 1 finish. Cold Rolled material is supplied with the following standard mill finishes.
No. 3 Finish
This is a ground unidirectional uniform finish obtained with 80 - 100 grit abrasive.
It is a good intermediate or starting surface finish for use in such instances where the surface will require further polishing operations to a finer finish after subsequent fabrication or forming.
No. 4 Finish
This is a ground unidirectional finish obtained with 150 grit abrasive. It is not highly reflective, but is a good general purpose finish on components which will suffer from fairly rough handling in service (eg restaurant equipment).
No. 6 Finish
These finishes are produced using rotating cloth mops (Tampico fibre, muslin or linen) which are loaded with abrasive paste.
The finish depends on how fine and abrasive is used, the uniformity and finish of the original surface.
The finish has a non-directional texture of varying reflectiveness. Satin Blend is an example of such a finish.
No. 7 Finish
This is a buffed finish having a high degree of reflectiveness.
It is produced by progressively using finer and finer abrasives and finishing with Buffing compounds. Some fine scratches (grit lines) may remain from the original starting surface.
No. 8 Finish
This is produced in an equivalent manner to a No. 7 Finish, the final operations being done with extremely fine buffing compounds.
The final surface is blemish free with a high degree of image clarity, and is the true mirror finish.
Note
The finer polished finishes (No. 4, No. 6, No. 7 and No. 8) are generally only produced one side of the sheet, the reverse side being either a 2B or No. 3 Finish.
58500 sqm of main area in Headquarter, total investment USD 490
million.
2 sets twenty-roll reversible cold rolling line with max width
1450mm.
2 sets of traction type consecutive Bright Annealing Line.
1 set of tension leveling processing line with max width 1450mm.
2 sets of tempering line.
1 set of withdrawal and straightening unit.
Other related washing, clearing and testing facilities.
FAQ
Q:Are you Manufacturer or Trading company?
A: We are both manufacturer and trade in Qingdao city, Shandong Province, China.
Q: Which mill hot rolled coils are you using?
A: We are using such as BAOSTEEL, TISCO, JISCO,POSCO and LIANZHONG (GUANGZHOU LISCO) etc.
Q:What's your main products?
A: Our main products is including Stainless Steel coil/sheet grade in 201,304,316L,430,410,Stainless Steel circle grade in 201&304&410&430.
Q: Can you make DDQ ( Deep Drawing Quality)?
A: Yes, we can. Our material can be used for stainless steel pots, stainless steel sinks, stainless steel bowls etc. U can tell us your usage, and we will adjust the mechanical propertise to meet your requirement.
Q: How to get a sample?
A: FREE samples are available for your checking and testing.If you require for a sma
Description of ZPSS POSCO Cold Rolled 304 0.35 0.3mm Mill Edge Stainless Steel Coils
Product Spec
Type
Int'l Standard
Steel Designation
Main Chemical Compositions
Mechanical Properties
Cr
Ni
Mo
Proof Stress (N/mm2)
Tensile Strength (N/mm2)
Elong- ation
HRB
304
ASTM A240-96
UNS S30403
18.00 ~20.00
8.00~12.00
>=
170
>=
485
>=
40
>=
92
304
ASME SA240-95
UNS S30403
18.00 ~20.00
8.00~12.00
>=
170
>=
485
>=
40
>=
92
304
CNS G3163-93
304L
18.00 ~20.00
8.00~13.00
>=
175
>=
480
>=
40
>=
90
304
JIS G4303-91
SUS 304L
18.00 ~20.00
8.00~13.00
>=
175
>=
480
>=
40
>=
90
304
EN 10088:1995
1.4306
18.00 ~20.00
8.00~12.00
>=
200
500 ~ 650
>=
45
304
DIN 17440:1996
1.4306
18.00 ~20.00
8.00~12.00
>=
180
460 ~ 680
>=
40
Thickness
Width
Surface
2.5.0mm ~ 28.0mm
1220MM ~ Max. 2300mm
NO.1
Thickness
Width
Hardness
0.1mm ~ 0.4mm
Could be negotiable for small strips,max.300mm
1/4H ; 3/4H ; 1/2H ; FULL HARD
0.5mm ~ 3.0mm
1220mm ~ Max. 1540mm
Description
ZPSS POSCO Cold Rolled 304 0.35 0.3mm Mill Edge Stainless Steel Coils
Standard
ASTM  GB/T  JIS4  ASME BS  DIN  EN.
Material
310S, 310, 309, 309S, 316, 316L, 316Ti, 317, 317L, 321, 321H, 347, 347H, 304, 304L,
302, 301, 201, 202, 403, 405, 409, 409L, 410, 410S, 420, 430, 631, 904L, Duplex, etc
Brand  name
TISCO, BAO STEEL, ZPSS, LISCO, POSCO, NAS.
Technique
Hot  Rolled  And  Cold  Rolled.
Surface
2B, 2D, BA, NO. 1, NO. 4, NO. 8, 8K, mirror  , checkered  , embossed  , hair  line, sand  blast,Brush, etching, etc
Thickness
0.25~150mm
Width
600mm, 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length
2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Price  term
Ex-Work, FOB, CNF, CFR, CIF, etc
Surface Treatment and characteristic
Surface finish
Characteristics and application
NO.2B
The surface brightness and flatness of no2B is better than no2D. then through a special surface
treatment to improve its mechanical properties,No2B could nearly satisfy
comprehensive uses.
The surface is finished by heat treatment and pickling or processes corresponding thereto after hot rolling.
NO.1
NO.4
Polished with abrasive belt of grit #150-#180,have better brightness with discontinuous
coarse stria,but thinner than No3, are used as bathtub buildings inner and external
ornaments electrical appliances kitchen utensils and food processing equipment etc.
Polished with abrasive belt of grit #150-#320 on the NO.4 finish and has continuous streak
HL
mainly used as buildings ornaments elevators,door of building, frontal plate etc.
BA
Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good
reflexivity like mirror,kitchen apparatus,ornament etc.
8K
The product have excellent brightness and prefer reflexivity can to be the mirror.
No 1 Finish
Plate is hot rolled, annealed, pickled and passivated. This results in a dull, slightly rough surface; quite suitable for industrial applications which generally involve the range of plate thicknesses. Grinding marks may be visible in isolated areas.
Some of the thinner thicknesses within the plate range are Cold Rolled; but Sheet, Coil and Strip gauges are produced by Cold Rolling, ie rolled without and heating of the material. Cold Rolling hardens the material, and the thinner sizes may have to be subjected to an intermediate anneal and pickle, or bright annealed, during the reduction of thickness to final gauge.
The starting material for Cold Rolling always has a No. 1 finish. Cold Rolled material is supplied with the following standard mill finishes.
No. 3 Finish
This is a ground unidirectional uniform finish obtained with 80 - 100 grit abrasive.
It is a good intermediate or starting surface finish for use in such instances where the surface will require further polishing operations to a finer finish after subsequent fabrication or forming.
No. 4 Finish
This is a ground unidirectional finish obtained with 150 grit abrasive. It is not highly reflective, but is a good general purpose finish on components which will suffer from fairly rough handling in service (eg restaurant equipment).
No. 6 Finish
These finishes are produced using rotating cloth mops (Tampico fibre, muslin or linen) which are loaded with abrasive paste.
The finish depends on how fine and abrasive is used, the uniformity and finish of the original surface.
The finish has a non-directional texture of varying reflectiveness. Satin Blend is an example of such a finish.
No. 7 Finish
This is a buffed finish having a high degree of reflectiveness.
It is produced by progressively using finer and finer abrasives and finishing with Buffing compounds. Some fine scratches (grit lines) may remain from the original starting surface.
No. 8 Finish
This is produced in an equivalent manner to a No. 7 Finish, the final operations being done with extremely fine buffing compounds.
The final surface is blemish free with a high degree of image clarity, and is the true mirror finish.
Note
The finer polished finishes (No. 4, No. 6, No. 7 and No. 8) are generally only produced one side of the sheet, the reverse side being either a 2B or No. 3 Finish.
58500 sqm of main area in Headquarter, total investment USD 490
million.
2 sets twenty-roll reversible cold rolling line with max width
1450mm.
2 sets of traction type consecutive Bright Annealing Line.
1 set of tension leveling processing line with max width 1450mm.
2 sets of tempering line.
1 set of withdrawal and straightening unit.
Other related washing, clearing and testing facilities.
FAQ
Q:Are you Manufacturer or Trading company
A: We are both manufacturer and trade in
Qingdao
city,
Shan
dong Province, China.
Q: Which mill hot
rolled
coils are you using
A: We are using such as BAOSTEEL, TISCO, JISCO
,POSCO
and LIANZHONG (GUANGZHOU LISCO) etc.
Q:What's your main products
A: Our main products is including Stainless Steel coil/sheet grade in 201,304,316L,430,410,Stainless Steel circle grade in 201&304&410&430.
Q: Can you make DDQ ( Deep Drawing Quality)
A: Yes, we can. Our material can be used for stainless steel pots, stainless steel sinks, stainless steel bowls etc. U can tell us your usage, and we will adjust the mechanical propertise to meet your requirement.
Q: How to get a sample
A: FREE samples are available for your checking and testing.If you require for a small piece,we can afford courier cost,it depends.
Why Do You Choose Us
·
We have high reputation based on best quality products;
·
We can offer competitive price for your bu
si
ness;
·
Our after-sell service team will help you solving all the related problems ;
·
Shortest and stable delivery time;
·
We can provide stainless steel processing services.